The top handle chainsaws, just like any other equipment, is prone to the agents of determination. These agents have the tendency to diminish their efficacy with time. It is only fair that you get to know about these issues and how to mitigate them, all for the sake of enjoying better performances to know how to tune a top handle chainsaw.
In these two-part discussions, we shall look into those issues that impact the performance of saws and how to mitigate them. Just to reiterate what we have already stated above, our overall goal is to make it possible for you to make the most of this equipment and your swing undertakings.
Issues That Impact The Performance Of A Top Handle Chainsaw
They make the cutting blades and mechanisms of these saws of iron or ferrous metals, which are prone to corrosion. When these parts come in direct contact with moisture, they rust and become weaker. This compromises their efficiency in such a way as to make your life harder.
With continued use and applications, the metallic components of the chainsaws become weaker and less supportive. They hence become less powerful and highly unlikely to deliver the awesome cutting outcomes you so yearn for. Those that are located at the joints are most vulnerable as they fidget a lot.
The bluntness of the Blades
After each cutting session, the blades become less sharp than they were previously. The situation in most cases is compounded by the existence of moisture and other corrosive agents. Yet again, they have to sharpen to revitalize their cutting capabilities. Reducing over-exposure to ambient air is also a necessary step.
Friction refers to the rubbing of parts of the blade with the items to cut. Prolonged and frequent rubbing of parts has the tendency to wear the said parts out and render them useless. This is besides the heat output, which may also melt plastics not to mention burning your own hands.
Every item has a fleeting value, the chainsaws are definitely no exception to this universal rule. Even when the equipment not used often, it will naturally lose its value and utility. This apparently is an eventuality that any lumber will have to confront at one point or another.
How to Tune A Top Handle Chainsaw For Better Performance
In this section, we look into how you may tune your top handle chainsaw to make it perform better.
Step I: Determine the exact problem
We have already stated that these pieces of equipment may sustain issues or various kinds. These are corrosion, metal fatigue, the bluntness of the blades, friction, and depreciation. It hence goes that your foremost step should be to determine the exact problem. That is because different issues require different intervention mechanisms and approaches.
Step II: Identify the tools and materials necessary
Having narrowed down to the exact issue at hand, you now have to look for those tools and materials needful for remedying them. Some of the most common tools you will find handy are compressed air, soapy water, Phillips screwdriver, a toothbrush, and a flat-head screwdriver, to name but a few!
Step III: Remedy the situation appropriately
Now move ahead to remedy the situation you will have identified above appropriately. For corrosion, a ball of steel wool will come in handy. Use it to remove the traces of rust and to deliver some sparklingly clean outcomes. Metal fatigue mostly requires replacements.
Look for a suitable spare part and fix it in the one’s the place that dilapidated. Blunt blades require some sharpening. Use a sharpened to etch out the edges of that metal. Last, you may also consider replacements with depreciation.
Step IV: Test for firmness
It is always a good thing to test the outcomes of any tuning undertaking to determine whether it endures the test of time. This may mean engaging the chainsaw to do something that hitherto, it was not capable of doing. Monitor the performance of the saw and note any need for further adjustments.
Step V: Make final touches
Before you go, make some final touches. You might never have another opportunity to inspect your chainsaw than this. This is the best time to lubricate the moving parts, grease the blades, and refuel the item in case it is fuel-powered, and so on. Inspect any other issues which might require further inventions too!
- Throughout your tuning, be sure it power the chainsaw off and its blades are still. The blades are very sharp and powerful. You might lose your own arms and limbs of you handle them recklessly.
- Read and adhere strictly to the manufacturer’s manual at all times. Remember, different chainsaws pose different characteristics. It may not always be that the guidelines we have issued above may apply to all chainsaws.
- Never hesitate to seek expert help in case you get stuck along the way. These items are very dangerous. It confronts the least you would want to happen an accident or any other enduring issue.
- Keep all children away from you, in tuning your top handle chainsaw. Because of their restless nature, they might easily come in direct contact with the saws in such a way as to endure accidents and other problems.
- Never forget to put on the relevant safety gears like gloves, gas masks, visor, and helmets. You want to seal every loophole which might let in accidents and further problems while handling your chores.
Though complicated and potentially injurious, the processes of identifying the issues that may impact adversely the proper functioning of a chainsaw and sorting the same area ‘mus’. know.’ This knowledge is useful in that the problems stated above may arise with no notice. You might never have time to seek external help.
By far, the best way of going about this issue is to read the manufacturer’s manual of the brand that makes your chainsaw. This way, you will gain the insight you need to go about repairing and troubleshooting yours. Watching some YouTube videos and practicing now and then will also help.